All commands below must be preceded with a period (.) with the exception of symbols and intervals.TradeStation Help
The following table is a comprehensive of TradeStation commands. For a list of commands broken down by application type, see Command Line Reference (Sorted by Application).
For each command, the long format is given first, followed by the short format, any parameters, and a description of the commands behavior. The Applies To column lists the applications in which the command is valid.
Chart Analysis commands will be applied to Data1 or the selected symbol, unless otherwise applicable. Desktop commands are available from all windows in the TradeStation Desktop. For more information on the TradeStation Desktop, see About the Desktop.
All commands below must be preceded with a period (.) with the exception of symbols and intervals.
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Ask |
.ASK |
|
Toggles the display of Ask prices on and off. |
Time & Sales |
|
.AutoScaleRange |
.ASR |
|
Sets Scale Range to 'Automatic' for the selected object. |
Chart Analysis |
|
.AutoScaleRangeScreen |
.ASRS |
|
Sets Automatic Scale Range to 'Date Range on Screen', using the last 'Based on' selection or, if not applicable, then the default 'Based on' selection. |
Chart Analysis |
|
.AutoScaleRangeEntire |
.ASRE |
|
Sets Automatic Scale Range to 'Entire Date Range'. |
Chart Analysis |
|
.AutoScaleRangePercent |
.ASRP |
|
Sets Automatic Scale Range to 'Percent Below/Above Last', based on the values in the Below/Above edit boxes. |
Chart Analysis |
|
.AutoScaleRangePercentBelow <p> |
.ASRPB <p> |
<number> (Required) |
Sets Automatic Scale Range to 'Percent Below/Above Last' and provides the 'Below' value as a required parameter. |
Chart Analysis |
|
.AutoScaleRangePercentAbove <p> |
.ASRPA <p> |
<number> (Required) |
Sets Automatic Scale Range to 'Percent Below/Above Last' and provides the 'Above' value as a required parameter. |
Chart Analysis |
|
.AxisIncrement |
.AI |
<number> <Auto> or <Automatic>
(Required) |
Sets the Custom Axis Increment to a specified numeric value. For Chart Analysis, clears the setting with 'Auto' or 'Automatic'. For Matrix, 'MM' resets to Minimum Move. |
Chart Analysis
Matrix |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Bar <p> .Bars <p> |
.BAR <p> .BARS <p> |
<bars> (Required) |
Changes the number of bars of historical data loaded. |
Chart Analysis |
|
.BarSpacing <p> |
.BS <p> |
<pixels> (Required) |
Sets the spacing between bars based on the specified number of pixels. |
Chart Analysis |
|
.BarSpacing <+><p> .BarSpacing <-><p> |
.BS <+><p> .BS <-><p> |
<pixels> (Required) |
Increases or decreases the spacing between bars based on the specified number of pixels. |
Chart Analysis |
|
.Bid |
.BID |
|
Toggles the display of Bid prices on and off. |
Time & Sales |
|
.BoxSize <p> |
.BSIZE <p> |
<number> (Required) |
Sets the box size for a Point & Figure chart. This parameter may be a decimal. |
Chart Analysis |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.CancelAllOrders |
|
|
Cancels all open orders. |
Order Execution |
|
.CancelAllOrdersSymbolAccount <p> |
.CAOSA <p> |
<symbol>, <account> (Required) |
Cancels all open orders for a specific account and symbol. Command details |
Order Execution |
|
.CancelLastOrder |
|
|
Cancels the last order sent. |
Order Execution |
|
.CancelOrder |
.CO |
|
Cancels orders using the OrderName alias. |
Order Execution |
|
.CancelReplaceSelected |
.CRS |
|
Enters the selected open order on the Orders tab into the Order Bar. |
TradeManager Order Execution |
|
.CancelReplaceSelectedMarket |
.CRSM |
|
Executes the Send Now - Replace this order as a Market Intelligent order for the selected open order on the Orders tab. |
TradeManager Order Execution |
|
.CancelReplaceSelectedPrice <p> |
.CRSP |
<parameter> (Optional) |
Replaces the selected open order on the Orders tab with the parameter. |
TradeManager Order Execution |
|
.CancelReplaceSelectedQuantity <p> |
.CRSQ |
<quantity> (Required) |
Replaces the selected open order on the Orders tab with the new quantity. |
TradeManager Order Execution |
|
.CancelReplaceLast |
.CRL |
|
Replaces the selected open order on the Orders tab into the Order Bar. |
Order Execution Trade Manager |
|
.CancelReplaceLastMarket |
.CRLM |
|
Executes the Send Now - Replace this order as a Market Intelligent order for the last open order. |
Order Execution |
|
.CancelReplaceLastPrice |
.CRLP |
<value> (Required)
|
Replaces the last open order with the new price or min move. |
Order Execution |
|
.CancelReplaceLastQuantity |
.CRLQ |
<quantity> (Required) |
Replaces the last open order with the new quantity. |
Order Execution |
|
.CenterLastPrice <p> |
.CLP <p> |
<on or off> (Required) |
Changes the centering of the last price if Scale Range is set to an Automatic setting other than 'Percent Below/Above Last'. The word 'on' or 'off' must be used. |
Chart Analysis |
|
.Close |
.C |
|
Closes the active workspace. |
Desktop |
|
.CloseAllPositions |
|
|
Closes all open positions. |
Order Execution |
|
.CloseDesktop |
.CDT |
|
Closes the active desktop. |
Desktop |
|
.CustomRenko |
.CMRenko |
<brick size> (Optional) <brick offset> (Optional) Ex. .CMRenko ".8, .2" |
Sets the chart to a Custom Renko chart using bricks that represent a fixed size and a brick offset that is also a fixed size, using specified parameters. Default parameters are used, if not specified. |
Chart Analysis |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Daily |
.D |
|
Changes the interval to Daily. |
Chart Analysis |
|
.DataWindow |
.DW |
|
Displays the Data window. |
Chart Analysis |
|
.Day <p> .Days <p> |
.DAY <p> .DAYS <p> |
<days> (Optional) |
Changes the amount of historical data to the specified number of days. |
Chart Analysis |
|
.Decrease Quantity |
|
|
Decreases the order quantity by the default increment. |
Order Execution |
|
.DecreasePrice |
|
|
Decreases the order price by the default increment. |
Order Execution |
|
.DecreaseStopPrice |
|
|
Decreases the stop order price by the default increment. |
Order Execution |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.ELOutputBar |
.ELO |
|
Displays the EasyLanguage Output Bar. |
Desktop |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Find <p> |
.FIND <p> |
<search word> (Optional) |
Finds the specified search word (or symbol). The Find dialog is opened if a word is not specified. |
RadarScreen |
|
.FirstDate <p> |
.FD <p> |
<mm/dd/yyy> (Required) |
Sets the first date of the symbol. |
Chart Analysis |
|
.Fixed |
.FIXED |
|
Enables Fixed scaling using current values. |
Chart Analysis |
|
.FixedMin <p> |
.FMin <p> |
<number> (Required) |
Specifies the Min value for Fixed scaling and automatically turns on Fixed scaling. |
Chart Analysis |
|
.FixedMax <p> |
.FMax <p> |
<number> (Required) |
Specifies the Max value for Fixed scaling and automatically turns on Fixed scaling. |
Chart Analysis |
|
.FormatAnalysisTechniques |
.FAT |
|
Opens the Format Analysis Techniques dialog to the Analysis Techniques tab. |
Chart Analysis |
|
.FormatStrategies |
.FST |
|
Opens the Format Analysis Techniques dialog to the Strategies tab. |
Chart Analysis |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.GraphDepth |
.GD |
|
Sets the graph to display depth. |
Matrix |
|
.GraphSize |
.GS |
|
Sets the graph to display size. |
Matrix |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Help |
.H |
|
Opens TradeStation Platform Help. |
Desktop |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.IncreasePrice |
|
|
Increases the order price by the default increment. |
Order Execution |
|
.IncreaseQuantity |
|
|
Increases the order quantity by the default increment. |
Order Execution |
|
.IncreaseStopPrice |
|
|
Increases the stop order price by the default increment. |
Order Execution |
|
.IncludeAnalysisTechnique <p> |
.IncAT <p> |
<on or off> (Required) |
Toggles the Expand Range to Include Analysis Techniques setting in the Automatic Scale Range calculations. The word 'on' or 'off' must be used as a parameter. |
Chart Analysis |
|
.IncludeOpenOrderLines <p> |
.IncOOL <P> |
<on or off> (Required) |
Toggles the Expand Range to Include Account Open Order Lines setting in the Automatic Scale Range calculations. The word 'on' or 'off' must be used as a parameter. |
Chart Analysis |
|
.InsertAnalysisGroup <p> |
.IAG <p> |
<analysis group> (Optional) |
Inserts the specified analysis group. If an analysis group is not specified, the Insert Analysis Groups dialog will display. |
Chart Analysis |
|
.InsertAnalysisTechnique <p> |
.IAT <p> |
<analysis technique> (Optional) |
Inserts the specified analysis technique. If the specified name is shared by both an analysis technique and a strategy, the analysis technique will be inserted. If an analysis technique is not specified, the Insert Analysis Techniques dialog will open to the tab that was last referenced. |
Chart Analysis |
|
.InsertColumn <p> |
.IC <p> |
<column> (Optional) |
Inserts the specified column. If a column is not specified, the Insert Column dialog will open. |
Hot Lists |
|
.InsertIndicatorColumn <p> |
.IIC <p> |
<column> (Optional) |
Inserts the specified indicator column. If a column is not specified, the Insert Indicator Columns dialog will open. |
RadarScreen |
|
.InsertKeyword <p> |
.IK <p> |
<keyword(s)> (Optional) |
Appends the specified keyword to the selected keyword filter. The keyword must be preceded by AND, OR, or NOT to connect it to the original keyword(s). For example, to add "textiles" to an existing keyword filter, the parameter would appear as follows: <AND textiles>. If a keyword is not specified, the Format Filter dialog will open. |
News |
|
.InsertStrategy <p> |
.IST <p> |
<Strategy> (Required) |
Inserts the specified Strategy. |
Chart Analysis |
|
.InsertSymbol <p> |
.ISY <p> |
<symbol> <symbol,symbol> (Optional) |
Appends the specified symbol to the selected symbol filter. If a symbol is not specified, the News Filter dialog will open. |
News RadarScreen
|
|
.InsertSymbol <p> |
.ISY <p> |
<symbol> (Optional) |
Inserts the specified symbol. If a symbol is not specified, the Insert Symbol dialog will open. |
News RadarScreen |
|
.InsertSymbolList <p> |
.ISYL <p> |
<symbol list> (Optional) |
Appends the specified symbol list to the selected symbol list filter. If a symbol list is not specified, the News Filter dialog will open. |
News RadarScreen |
|
.InsertSymbolList <p> |
.ISYL <p> |
<symbol> (Optional) |
Inserts the specified symbol list. If a symbol is not specified, the Insert Symbol List dialog will open. |
RadarScreen |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Kagi |
.Kagi |
<Reversal Amount> <Reversal Type> <Interval>
(Optional) Ex. .Kagi"2, price, 1min" |
Sets the chart to Kagi, which creates a reversal amount that can be specified as a fixed price or percentage using the specified parameters. Default parameters are used, if not specified. |
Chart Analysis |
|
.KagiInterval |
.KInt |
<Daily> <Weekly> <Monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required) |
Changes the interval currently used by a Kagi chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min. |
Chart Analysis |
|
.KagiReversal |
.KRev |
<reversal amount> <reversal type> (Required)
Ex. KRev"2,%" |
Changes the reversal amount and type of reversal for a Kagi chart. |
Chart Analysis |
|
.KaseBar |
.KBar |
<Target Range> <Interval>
(Optional) Ex. .KaseBar 2, 1min" |
Sets the chart to Kase Bar, which creates bars with a true range based on a user's specified Target Range value. Kase Bars can use specified parameters or the default parameters if none are specified. |
Chart Analysis |
|
.KaseBarInterval |
.KBInt |
<target range> <interval> <x> tick <x> minute <x> min
Ex. .KaseBarInterval 1 min |
Changes the interval of the underlying data of a Kase Bar chart. |
Chart Analysis |
|
.KaseBarRange |
.KBRng |
<range amount> Ex. 1, 1.5, 2, etc. (Required)
Ex.KaseBarRange 2 |
Changes the target range value for a Kase Bar chart. |
Chart Analysis |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.LabelRow <p> |
.LR <p> |
<label row text> (Required) |
Inserts a label row containing the specified text. |
RadarScreen |
|
.LastDate <p> |
.LD <p> |
<mm/dd/yyyy> (Required) |
Sets the last date of the symbol. |
Chart Analysis |
|
.LaunchMessageCenter |
.LMC |
|
Launches the Message Center window. |
Desktop |
|
.LaunchQuickQuote |
.LQQ |
|
Launches the Quick Quote window. |
Desktop |
|
.LaunchTicker |
.LT |
|
Launches the Ticker Bar. |
Desktop |
|
.LineBreak |
.LB |
<Line Breaks> <Interval>
(Optional) Ex. .LineBreak "2, 1 min" |
Sets the chart to a Line Break which is made up of a series of vertical blocks called lines which use closing prices to indicate market direction by specified parameters. Default parameters are used, if not specified. |
Chart Analysis |
|
.LineBreakInterval |
.LBInt |
<daily> <weekly> <monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required) |
Changes the interval currently used by a Line Break chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min.
|
Chart Analysis |
|
.LineBreakNumber |
.LBNum |
<value> (Required)
Ex. .LBNum 2 |
Changes the number of line breaks for a Line Break chart. |
Chart Analysis |
|
.LowerMargin <p> |
.LM <p> |
<number> (Required) |
Specifies the Lower Margin value as a percentage. This automatically turns on the upper/lower margin setting. |
Chart Analysis |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Margins <p> |
|
<on or off> (Required) |
Turns the display of upper/lower margins in the sub-graph either 'on' or 'off''. The Upper and Lower margin values will be based on the last or default settings. |
Chart Analysis |
|
.MaximizeAllDesktops |
|
|
Maximizes the desktop window from the restored position. |
Desktop |
|
.MeanRenko |
.MNRenko |
<brick size> (Optional) Ex. .mnrenko .5 |
Sets the chart to a Mean Renko chart using bricks that represent a fixed size and a brick offset that is equal to half of the brick size, using specified parameters. Default parameters are used, if not specified. |
Chart Analysis |
|
.MinimizeAllDesktops |
|
|
Minimizes the desktop window from the restored and/or maximized position. |
Desktop |
|
.Minute <p> .Minutes <p> |
.MIN <p> .MINS <p> |
<minutes> (Required) |
Displays the number of specified minutes past. |
Time & Sales |
|
.Minute <p> .Minutes <p> |
.MIN <p> .MINS <p> |
<minutes> (Required) |
Changes the interval to the specified number of minutes. |
Chart Analysis |
|
.MomentumBar |
.MBar |
<Range Amount> <Interval>
(Optional) Ex. .MomentumBar "2, 1 min" |
Sets the chart to a Momentum Bar which chart as standard vertical bars, yet each bar has a specified price range by using specified parameters. Default parameters are used, if not specified. |
Chart Analysis |
|
.MomentumBarInterval |
.MBInt |
<Daily> <Weekly> <Monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required) |
Changes the interval currently used by a Momentum Bar chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min. |
Chart Analysis |
|
.MomentumBarRange |
.MBRng |
<range amount> (Required)
Ex. MBRng 2 |
Changes the range amount for a Momentum Bar chart. |
Chart Analysis |
|
.Month <p> .Months <p> |
.MTH <p> .MTHS <p> |
<months> (Optional) |
Changes the amount of historical data to the specified number of months. |
Chart Analysis |
|
.Monthly |
.M |
|
Changes the interval to Monthly. |
Chart Analysis |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.NewChart |
.NC |
|
Creates a new Chart Analysis window. |
Desktop |
|
.NewDesktop |
.NDT |
|
Creates a new untitled desktop |
Desktop |
|
.NewHeadlinesFilter |
.NHF |
|
Inserts a new All Headlines filter. |
News |
|
.NewHotList |
.NHL |
|
Creates a new Hot Lists window. |
Desktop |
|
.NewInternetBrowser |
.NIB |
|
Creates a new Internet Browser window. |
Desktop |
|
.NewKeywordFilter <p> |
.NKF <p> |
<keyword(s)> (Optional) |
Inserts a new keyword filter based on the specified keyword(s). If a keyword is not specified, the News Filter window will open. |
News |
|
.NewMatrix |
.NM |
|
Creates a new Matrix window. |
Desktop |
|
.NewNews |
.NN |
|
Creates a new News window. |
Desktop |
|
.NewPaintBar |
.NPB |
|
Creates a new PaintBar document. |
|
|
.NewQuickTradeBar |
.NQTB |
|
Launches a new Quick Trade Bar |
Desktop |
|
.NewRadarScreen |
.NRS |
|
Creates a new RadarScreen window. |
Desktop |
|
.NewScanner |
.NSCN |
|
Creates a new Scanner LaunchPad window. |
Scanner |
|
.NewSymbolFilter |
.NSF <p> |
<symbol list> (Optional) |
Inserts a new symbol filter based on the specified symbol. |
News |
|
.NewTimeAndSales |
.NTS |
|
Creates a new Time & Sales window. |
Desktop |
|
.NewWindow |
.NW |
|
Opens the New Window dialog |
Desktop |
|
.NewWorkspace |
.NWS |
|
Creates a new workspace. |
Desktop |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Offline |
.OFFL |
|
Disconnects you from the TradeStation Network so you can work offline. |
Desktop |
|
.Online |
.ONL |
|
Displays the TradeStation Network Logon dialog so you can work online. |
Desktop |
|
.Open <p> |
.O <p> |
<workspace> (Required) |
Opens the specified workspace. |
Desktop |
|
.OpenDesktop |
.ODT |
<desktop> |
Opens a desktop. |
Desktop |
|
.OptimizationReport |
.OPTR |
|
Displays the Strategy Optimization Report. |
Chart Analysis |
|
.OrderBar |
.OB |
|
Displays the Order Bar. |
Desktop |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.PageDelete |
.PD |
|
Deletes the selected page. |
RadarScreen |
|
.PageInsert |
.PI |
|
Inserts a new RadarScreen page. |
RadarScreen |
|
.PageRename |
.PRN |
|
Renames the active RadarScreen page. |
RadarScreen |
|
.PercentChange |
.PC |
|
Toggles the percent change chart on and off, based on the first bar of the chart. |
Chart Analysis |
|
.PerformanceReport |
.PR |
|
Displays the Strategy Performance Report. |
Chart Analysis |
|
.PlaceOrder <p...> |
|
<action> <symbol> <quantity> <limit> <duration> <route> <account> <advanced> (Required)
Parameter details (Optional) |
Allows orders to be placed from macros or EasyLanguage using the provided parameters.
|
Order Execution |
|
.PointAndFigure |
.PF |
<Box Size> <Reversal> <Interval> <Basis> <One-Step-Back>
(Optional) Ex. PF".5, 3, 5 min, C, off" |
Sets the chart to Point & Figure which focuses on price changes by eliminating time and volume by using specified parameters for box size and reversal. Default parameters are used, if not specified. |
Chart Analysis |
|
.PointAndFigureInterval <p> |
.PFI <p> |
<Daily> <1 tick> <1 minute> <5 minutes> <15 minutes> <60 minutes> (Required) Ex. .PFI "2,1 min" |
Changes the interval currently used by a Point & Figure chart. The following intervals are accepted as parameters: Daily, 1 tick, 1 minute, 5 minutes, 15 minutes, and 60 minutes. |
Chart Analysis |
|
.PositionGraphBar |
.PGB |
|
Toggles the position graph bar to display/hide. |
Desktop |
|
.Preferences |
.PREF |
|
Displays the Preferences dialog for the active application. |
Chart Analysis RadarScreen Scanner |
|
|
.P |
|
Prints the active window. |
Desktop |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.QuoteBa.qq msft r |
.QB |
|
Toggles the display of the Quote Bar. |
Matrix |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.RangeBar |
.RBar |
<Range Amount> <Interval>
(Optional) Ex. .RangeBar "2, 1 min" |
Sets the chart to Range Bar which focuses only on price change; not time by using specified parameters. Default parameters are used, if not specified. |
Chart Analysis |
|
.RangeBarInterval |
.RBInt |
<Daily> <Weekly> <Monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required)
Ex. RBInt 5 min |
Changes the interval currently used by a Range Bar chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min. |
Chart Analysis |
|
.RangeBarRange |
.RBRng |
<value> (Required)
Ex: .RBRng 2 |
Changes the range amount for the Range Bar chart. |
Chart Analysis |
|
.Redraw |
.RD |
|
Redraws the active Chart Analysis window. |
Chart Analysis |
|
.ReferenceRows |
.RR |
|
Toggles the references rows on and off. |
RadarScreen |
|
.Refresh |
.RF |
|
Refreshes/reloads the active window. |
Chart Analysis Hot Lists Matrix News RadarScreen Time & Sales |
|
.Regionals |
.REG |
|
Toggles the display of regional options on and off. |
|
|
.RenamePosition |
.RPOS |
|
Opens the Rename Position window. |
|
|
.Renko |
|
<brick size> (Optional) Ex. .Renko |
Sets the chart to a |
Chart Analysis |
|
.Reversal <p> |
.REV <p> |
<number> (Required) |
Sets the reversal size for a Point & Figure chart. |
Chart Analysis |
|
.ReversePosition <p> |
|
<symbol>, <account>, <OSO Template> (Required/Optional) |
Reverses a position for a specific account and symbol with an optional Bracket OSO Template. |
Order Execution |
|
.Right <p> |
.R <p> |
<spaces> (Required) |
Sets the space to the right of the chart based on the number specified. |
Chart Analysis |
|
.Right <+><p> .Right <-><p> |
.R <+><p> .R <-><p> |
<spaces> (Required) |
Increases or decreases the number of spaces to the right of the chart based on the number specified. |
Chart Analysis |
|
.Run <p> |
.RUN <p> |
<executable file> (Required) |
Executes the instructions typed in. A file name is required but the path is optional. |
Desktop |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Save |
.S |
|
Saves the active workspace. |
Desktop |
|
.SaveAll |
.SALL |
|
Saves all workspaces. |
Desktop |
|
.SaveAllDesktops |
.SADT |
|
Saves all desktops |
Desktop |
|
.SaveAs <p> |
.SAS <p> |
<workspace> (Optional) |
Saves the active workspace with a different name. |
Desktop |
|
.SaveDesktop |
.SDT <p> |
<desktop> |
Saves the specified desktop. |
Desktop |
|
.ScaleType <p> |
.ST <p> |
<Linear> <Log or Semi-log> (Required) |
Sets the Scale Type that should be used for the selected object to either Linear or Log. |
Chart Analysis |
|
.ScrollBar |
.SCROLL |
|
Toggles the scroll bar on and off for the active window. |
Chart Analysis |
|
.Second <p> .Seconds <p> |
.SEC <p> .SECS <p> |
<seconds> (Required) |
Changes the interval to the specified number of seconds. |
Chart Analysis |
|
.Session <p> |
.SESS <p> |
<session> (Required) |
Sets the session to be used. |
Chart Analysis RadarScreen
|
|
.SessionBreak |
.SB |
|
Toggles the session break lines on and off for the active window. |
Chart Analysis |
|
.Share <p> .Shares <p> |
.SHARE <p> .SHARES <P> |
<shares> (Required) |
Changes the interval to the specified number of shares. |
Chart Analysis |
|
.StatusBar |
.STATUS |
|
Displays the Status Bar. |
Desktop |
|
.SummaryView |
.SV |
|
Toggles the display of the Summary pane. |
|
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Tick <p> .Ticks <p> |
.T <p> |
<ticks> (Required) |
Displays the number of specified ticks past. |
Time & Sales |
|
.Tick <p> .Ticks <p> |
.T <p> |
<ticks> (Required) |
Changes the interval to the specified number of ticks. |
Chart Analysis |
|
.TickDay .TicksDay |
.TDAY |
|
Displays all of the ticks for the day. |
Time & Sales |
|
.TitleBar |
.TB |
|
Toggles the nonactive window's title bar to display/hide. Displays active window's title bar. |
Desktop |
|
.TitleBarAll |
.TBA |
|
Toggles the active window's title bar to display/hide. |
Desktop |
|
.TMPerformanceReport |
.TMPR |
|
Opens/closes the TradeManager Performance Report. |
Chart Analysis |
|
.TrackID <p> |
.TID <p> |
<market maker ID> (Required) |
Tracks the specified market maker. |
|
|
.Trade |
.TRD |
|
Toggles the display of Trade prices on and off. |
Time & Sales |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.UpdateIndication |
.UI |
|
Toggles the update indication on and off. |
RadarScreen |
|
.UpperMargin <p> |
.UM <p> |
<number> <Required> |
Specifies the upper margin value as a percentage. This automatically turns on the upper/lower margin setting. |
Chart Analysis |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
|
|
|
|
|
|
Long |
Short |
Parameter <p> |
Description |
Applies To |
|
.Week <p> .Weeks <p> |
.WK <p> .WKS <p> |
<weeks> (Optional) |
Changes the amount of historical data to the specified number of weeks. |
Chart Analysis |
|
.Weekly |
.W |
|
Changes the interval to Weekly. |
Chart Analysis |
|
.WorkspaceTabs |
|
|
Toggles to display/hide the workspace tab. |
Desktop |
|
|
|
|
|
|
|
Long |
Short |
Parameter <> |
Description |
Applies To |
|
.Year <p> .Years <p> |
.YR <p> .YRS <p> |
<years> (Optional) |
Changes the amount of historical data to the specified number of years. |
Chart Analysis |