TradeStation Help
Following is reference for TradeStation commands, organized by application. For a comprehensive list of all TradeStation commands listed alphabetically, see Command Line Reference (All Commands).
For each command, the long format is given first, followed by the short format, any parameters, and a description of the commands behavior.
Commands must be preceded with a period (.) with the exception of symbols and intervals.
Long |
Short |
Parameter |
Description |
.ExecuteBasket |
|
<list name>, <account>, <side>, <percent>, <route>, <duration> Parameter Details (Required) |
Executes a specified basket using the provides parameters. |
Commands must be preceded with a period (.) with the exception of symbols and intervals. Chart Analysis commands will be applied to Data1 or the selected symbol, unless otherwise applicable.
Long |
Short |
Parameter |
Description |
View menu |
|
|
|
.DataWindow |
.DW |
|
Displays or hides the Data window. |
.OptimizationReport |
.OPTR |
|
Displays the Strategy Optimization Report. |
.PerformanceReport |
.PR |
|
Displays the Strategy Performance Report. |
.Preferences |
.PREF |
Displays the Chart Analysis Preferences dialog. |
|
.InsertAnalysisGroup <p> |
.IAG <p> |
<analysis group> (Optional) |
Inserts the specified analysis group. If an analysis group is not specified, the Insert Analysis Groups dialog will display. |
.InsertAnalysisTechnique <p> |
.IAT <p> |
<analysis technique> (Optional) |
Inserts the specified analysis technique. If the specified name is shared by both an analysis technique and a strategy, the analysis technique will be inserted. If an analysis technique is not specified, the Insert Analysis Techniques dialog will open to the tab that was last referenced. |
.InsertStrategy <p> |
.IST <p> |
<strategy> (Required) |
Inserts the specified Strategy. |
.InsertSymbol <p> |
.ISY <p> |
<symbol> (Optional) |
Inserts the specified symbol as the next available data stream, in the next available sub-graph. If a symbol is not specified, the Insert Symbol dialog will open. |
Format menu |
|
|
|
.AutoScaleRange |
.ASR |
|
Sets Scale Range to 'Automatic' for the selected object. |
.AutoScaleRangeScreen |
.ASRS |
|
Sets Automatic Scale Range to 'Date Range on Screen', using the last 'Based on' selection or, if not applicable, then the default 'Based on' selection. |
.AutoScaleRangeEntire |
.ASRE |
|
Sets Automatic Scale Range to 'Entire Date Range'. |
.AutoScaleRangePercent |
.ASRP |
|
Sets Automatic Scale Range to 'Percent Below/Above Last', based on the values in the Below/Above edit boxes. |
.AutoScaleRangePercentBelow <p> |
.ASRPB <p> |
<number> (Required) |
Sets Automatic Scale Range to 'Percent Below/Above Last' and provides the 'Below' value as a required parameter. |
.AutoScaleRangePercentAbove <p> |
.ASRPA <p> |
<number> (Required) |
Sets Automatic Scale Range to 'Percent Below/Above Last' and provides the 'Above' value as a required parameter. |
.AxisIncrement <p> |
.AI <p> |
<number> <Auto> <Automatic> (Required) |
Sets the Custom Axis Increment to a specified numeric value or clears the setting with 'Auto' or 'Automatic'. |
.Bar <p> .Bars <p> |
.BAR <p> .BARS <p> |
<bars> (Required) |
Changes the number of bars of historical data loaded. |
.BarSpacing <p> |
.BS <p> |
<pixels> (Required) |
Sets the spacing between bars based on the specified number of pixels. |
.BarSpacing <+><p> .BarSpacing <-><p> |
.BS <+><p> .BS <-><p> |
<pixels> (Required) |
Increases or decreases the spacing between bars based on the specified number of pixels. |
.BoxSize <p> |
.BSIZE <p> |
<number> (Required) |
Sets the box size for a Point & Figure chart. This parameter may be a decimal. |
.CenterLastPrice <p> |
.CLP <p> |
<on or off> (Required) |
Changes the centering of the last price if Scale Range is set to an Automatic setting other than 'Percent Below/Above Last'. The word 'on' or 'off' must be used. |
.CustomRenko |
.CMRenko |
<brick size> (Optional) <brick offset> (Optional) Ex. .CMRenko ".8, .2" |
Sets the chart to a Custom Renko chart using bricks that represent a fixed size and a brick offset that is also a fixed size, using specified parameters. Default parameters are used, if not specified. |
.Daily |
.D |
|
Changes the interval to Daily. |
.Day <p> .Days <p> |
.DAY <p> .DAYS <p> |
<days> (Optional) |
Changes the amount of historical data to the specified number of days. |
.FirstDate <p> |
.FD <p> |
<mm/dd/yyyy> (Required) |
Sets the first date of the symbol. |
.Fixed |
.FIXED |
|
Enables Fixed scaling using current values. |
.FixedMin <p> |
.FMin <p> |
<number> (Required) |
Specifies the Min value for Fixed scaling and automatically turns on Fixed scaling. |
.FixedMax <p> |
.FMax <p> |
<number> (Required) |
Specifies the Max value for Fixed scaling and automatically turns on Fixed scaling. |
.FormatAnalysisTechniques |
.FAT |
|
Opens the Format Analysis Techniques & Strategies dialog to the Analysis Techniques tab. |
.FormatStrategies |
.FST |
|
Opens the Format Analysis Techniques & Strategies dialog to the Strategies tab. |
.IncludeAnalysisTechnique <p> |
.IncAT <p> |
<on or off> (Required) |
Toggles the Expand Range to Include Analysis Techniques setting in the Automatic Scale Range calculations. The word 'on' or 'off' must be used as a parameter. |
.IncludeOpenOrderLines <p> |
.IncOOL <P> |
<on or off> (Required) |
Toggles the Expand Range to Include Account Open Order Lines setting in the Automatic Scale Range calculations. The word 'on' or 'off' must be used as a parameter. |
.Kagi |
.Kagi |
(Optional) Ex. .Kagi"2, price, 1min" |
Sets the chart to Kagi, which creates a reversal amount that can be specified as a fixed price or percentage using the specified parameters. Default parameters are used, if not specified. |
.KagiInterval |
.KInt |
<Daily> <Weekly> <Monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required)
|
Changes the interval currently used by a Kagi chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min. |
.KagiReversal |
.KRev |
<reversal amount> <reversal type> (Required) Ex. KRev"2,%" |
Changes the reversal amount and type of reversal for a Kagi chart. |
.KaseBar |
.KBar |
(Optional) Ex. KaseBar "2, 1 min" |
Sets the chart to Kase Bar, which creates bars with a true range based on a user's specified Target Range value. Kase Bars can use specified parameters or the default parameters if none are specified. |
.KaseBarInterval |
.KBInt |
<target range> <interval> <x> tick <x> minute <x> min Ex. .KaseBarInterval 1 min |
Changes the interval of the underlying data of a Kase Bar chart. |
.KaseBarRange |
.KBRng |
<range amount> Ex. 1, 1.5, 2, etc. (Required)
Ex.KaseBarRange 2 |
Changes the target range value for a Kase Bar chart. |
.LastDate <p> |
.LD <p> |
<mm/dd/yyyy> (Required) |
Sets the last date of the symbol. |
.LineBreak |
.LB |
(Optional) Ex. .LineBreak "2, 1 min" |
Sets the chart to a Line Break which is made up of a series of vertical blocks called lines which use closing prices to indicate market direction by specified parameters. Default parameters are used, if not specified. |
.LineBreakInterval |
.LBInt |
<daily> <weekly> <monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required) |
Changes the interval currently used by a Line Break chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min. |
.LineBreakNumber |
.LBNum |
<value> (Required) Ex. .LBNum 2 |
Changes the number of line breaks for a Line Break chart. |
.LowerMargin <p> |
.LM <p> |
<number> <Required> |
Specifies the Lower margin value as a percentage. This automatically turns on the upper/lower margin setting. |
.Margins <p> |
|
<on or off> (Required) |
Turns the display of upper/lower margins in the sub-graph either 'on' or 'off''. The Upper and Lower margin values will be based on the last or default settings. |
.MeanRenko |
.MNRenko |
<brick size> (Optional) Ex. .mnrenko .5 |
Sets the chart to a Mean Renko chart using bricks that represent a fixed size and a brick offset that is equal to half of the brick size, using specified parameters. Default parameters are used, if not specified. |
.Minute <p> .Minutes <p> |
.MIN <p> .MINS <p> |
<minutes> (Required) |
Changes the interval to the specified number of minutes. |
.MomentumBar |
.MBar |
(Optional) Ex. .MomentumBar "2, 1 min" |
Sets the chart to a Momentum Bar which chart as standard vertical bars, yet each bar has a specified price range by using specified parameters. Default parameters are used, if not specified. |
.MomentumBarInterval |
.MBInt |
<Daily> <Weekly> <Monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required) |
Changes the interval currently used by a Momentum Bar chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min. |
.MomentumBarRange |
.MBRng |
<range amount> (Required) Ex. MBRng 2 |
Changes the range amount for a Momentum Bar chart. |
.Month <p> .Months <p> |
.MTH <p> .MTHS <p> |
<months> (Optional) |
Changes the amount of historical data to the specified number of months. |
.Monthly |
.M |
|
Changes the interval to Monthly. |
.PercentChange |
.PC |
|
Toggles the percent change chart on and off, based on the first bar of the chart. |
.PointAndFigure |
.PF |
(Optional) Ex. PF".5, 3, 5 min, C, off" |
Sets the chart to Point & Figure which focuses on price changes by eliminating time and volume by using specified parameters for box size and reversal. Default parameters are used, if not specified. |
.PointAndFigureInterval <p> |
.PFI <p> |
<Daily> <1 tick> <1 minute> <5 minutes> <15 minutes> <60 minutes> (Required) |
Changes the interval currently used by a Point & Figure chart. The following intervals are accepted as parameters: Daily, 1 tick, 1 minute, 5 minutes, 15 minutes, and 60 minutes. |
.RangeBar |
.RBar |
<Range Amount> <Interval>
(Optional) Ex. .RangeBar "2, 1 min" |
Sets the chart to Range Bar which focuses only on price change; not time by using specified parameters. Default parameters are used, if not specified. |
.RangeBarInterval |
.RBInt |
<Daily> <Weekly> <Monthly> <x tick> <x ticks> <x minute> <x minutes> <x min> (x is an integer) (Required) Ex. RBInt 5 min |
Changes the interval currently used by a Range Bar chart. The following intervals are accepted as parameters: daily, weekly, monthly, <x> tick, <x> ticks, <x> minute, <x> minutes, and <x> min. |
.RangeBarRange |
.RBRng |
<value> (Required) Ex: .RBRng 2 |
Changes the range amount for the Range Bar chart. |
.Renko |
|
<brick size> (Optional) Ex. .Renko |
Sets the chart to a |
.Reversal <p> |
.REV <p> |
<number> (Required) |
Sets the reversal size for a Point & Figure chart. |
.Right <p> |
.R <p> |
<spaces> (Required) |
Sets the space to the right of the chart based on the number specified. |
.Right <+><p> .Right <-><p> |
.R <+><p> .R <-><p> |
<spaces> (Required) |
Increases or decreases the number of spaces to the right of the chart based on the number specified. |
.ScaleType <p> |
.ST <p> |
<Linear> <Log or Semi-log> (Required) |
Sets the Scale Type that should be used for the selected object to either Linear or Log. |
.ScrollBar |
.SCROLL |
|
Toggles the scroll bar on and off for the active window. |
.Session <p> |
.SESS <p> |
<session> (Required) |
Sets the session to be used. |
.Second <p> .Seconds <p> |
.SEC <p> .MINS <p> |
<seconds> (Required) |
Changes the interval to the specified number of seconds. |
.SessionBreak |
.SB |
|
Toggles the session break lines on and off for the active window. |
.Share <p> .Shares <p> |
.SHARE <p> .SHARES <p> |
<shares> (Required) |
Changes the interval to the specified number of shares. |
.Tick <p> .Ticks <p> |
.T <p> |
<ticks> (Required) |
Changes the interval to the specified number of ticks. |
.UpperMargin <p> |
.UM <p> |
<number> <Required> |
Specifies the upper margin value as a percentage. This automatically turns on the upper/lower margin setting. |
.Week <p> .Weeks <p> |
.WK <p> .WKS <p> |
<weeks> (Optional) |
Changes the amount of historical data to the specified number of weeks. |
.Weekly |
.W |
|
Changes the interval to Weekly. |
.Year <p> .Years <p> |
.YR <p> .YRS <p> |
<years> (Optional) |
Changes the amount of historical data to the specified number of years. |
Commands must be preceded with a period (.) with the exception of symbols and intervals. Desktop commands are available from all windows in the TradeStation Desktop. For more information on the TradeStation Desktop, see About the Desktop.
Long |
Short |
Parameter |
Description |
File menu |
|
|
|
.Close |
.C |
|
Closes active workspace. |
.CloseDesktop |
.CDT |
|
Closes the active desktop. |
.MaximizeAllDesktops |
|
|
Maximizes the desktop window from the restored position. |
.MinimizeAllDesktops |
|
|
Minimizes the desktop window from the restored and/or maximized position. |
.NewChart |
.NC |
|
Creates a new Chart Analysis window. |
.NewDesktop |
.NDT |
|
Creates a new untitled desktop. |
.NewHotList |
.NHL |
|
Creates a new Hot Lists window. |
.NewInternetBrowser |
.NIB |
|
Creates a new Internet Browser window. |
.NewMarketDepth |
.NMD |
|
Creates a new Market Depth window. |
.NewMatrix |
.NM |
|
Creates a new Matrix window. |
.NewNews |
.NN |
|
Creates a new News window. |
.NewRadarScreen |
.NRS |
|
Creates a new RadarScreen window. |
.NewResearch |
.NR |
|
Creates a new Research window. |
.NewTimeAndSales |
.NTS |
|
Creates a new Time & Sales window. |
.NewWindow |
.NW |
|
Opens the New Window dialog. |
.NewWorkspace |
.NWS |
|
Creates a new workspace. |
.Offline |
.OFFL |
|
Disconnects you from the TradeStation Network so you can work offline. |
.Online |
.ONL |
|
Displays the TradeStation Network Logon dialog so you can work online. |
.Open <p> |
.O <p> |
<workspace> (Optional) |
Opens the specified workspace. |
.OpenDesktop |
.ODT |
<desktop> |
Opens a desktop. |
.PositionGraphBar |
.PGB |
|
Toggles the position graph bar to display/hide. |
|
.P |
|
Prints the active window. |
.Run <p> |
|
<executable file> (Required) |
Executes the instructions typed in. A file name is required but the path is optional. |
.Save |
.S |
|
Saves the active workspace. |
.SaveAll |
.SALL |
|
Saves all workspaces. |
.SaveAllDesktops |
.SADT |
<desktop> |
Saves all desktops. |
.SaveAs <p> |
.SAS <p> |
<workspace> (Optional) |
Saves the active workspace with a different name. |
.SaveDesktop |
.SDT |
<desktop> (Optional) |
Saves the specified desktop. |
.Workspace Tabs |
|
|
Toggles to display or hide the workspace tab. |
View menu |
|
|
|
.ELOutputBar |
.ELO |
|
Displays the EasyLanguage Print Log. |
.LaunchMessageCenter |
.LMC |
|
Launches the Message Center window. |
.LaunchQuickQuote |
.LQQ |
|
Launches the Quick Quote window. |
.LaunchTicker |
.LT |
|
Launches the Ticker Bar. |
.NewQuickTradeBar |
.NQTB |
Launches the Quick Trade Bar. |
|
.OrderBar |
.OB |
|
Displays the Order Bar. |
.StatusBar |
.STATUS |
|
Displays the Status Bar. |
.TitleBar |
.TB |
|
Toggles the nonactive window's title bar to display/hide. Displays active window's title bar. |
.TitleBarAll |
.TBA |
|
Toggles the title bar between display/hide for all windows. |
Help menu |
|
|
|
.Help |
.H |
|
Opens TradeStation Platform Help. |
Commands must be preceded with a period (.) with the exception of symbols and intervals.
Long |
Short |
Parameter |
Description |
.InsertColumn <p> |
.IC <p> |
<column> (Optional) |
Inserts the specified column. If a column is not specified, the Insert Column window will open. |
.Refresh |
.RF |
|
Refreshes/reloads the active window. |
Commands must be preceded with a period (.) with the exception of symbols and intervals.
Long |
Short |
Parameter |
Description |
.GraphDepth |
.GD |
|
Sets the graph to display depth. |
.GraphSize |
.GS |
|
Sets the graph to display size. |
.QuoteBar |
.QB |
|
Toggles the display of the Quote Bar. |
.Refresh |
.RF |
|
Refreshes/reloads the active window. |
.SummaryView |
.SV |
|
Toggles the display of the Summary pane. |
.TrackID <p> |
.TID <p> |
<market maker ID> (Required) |
Tracks the specified market maker. |
Commands must be preceded with a period (.) with the exception of symbols and intervals.
Long |
Short |
Parameter |
Description |
.AxisIncrement |
.AI |
<number> <MM> (Required) |
Sets the Custom Axis Increment to a specified numeric value or resets to Minimum Move with 'MM'. |
.GraphDepth |
.GD |
|
Sets the graph to display depth. |
.GraphSize |
.GS |
|
Sets the graph to display size. |
Commands must be preceded with a period (.) with the exception of symbols and intervals.
Long |
Short |
Parameter |
Description |
.InsertKeyword <p> |
.IK <p> |
<keyword(s)> (Optional) |
Appends the specified keyword to the selected keyword filter. The keyword must be preceded by AND, OR, or NOT to connect it to the original keyword(s). For example, to add "textiles" to an existing keyword filter, the parameter would appear as follows: <AND textiles>. If a keyword is not specified, the Format Filter window will open. |
.InsertSymbol <p> |
.ISY <p> |
<symbol> <symbol,symbol> (Optional) |
Appends the specified symbol to the selected symbol filter. If a symbol is not specified, the News Filter window will open. |
.InsertSymbolList <p> |
.ISYL <p> |
<symbol list> (Optional) |
Appends the specified symbol list to the selected symbol list filter. If a symbol list is not specified, the News Filter window will open. |
.NewHeadlinesFilter |
.NHF |
|
Inserts a new All Headlines filter. |
.NewKeywordFilter <p> |
.NKF <p> |
<keyword(s)> (Optional) |
Inserts a new keyword filter based on the specified keyword(s). If a keyword is not specified, the News Filter window will open. |
.NewSymbolFilter |
.NSF <p> |
<symbol list> (Required) |
Inserts a new symbol filter based on the specified symbol. |
.Refresh |
.RF |
|
Refreshes/reloads the active window. |
Commands must be preceded with a period (.) with the exception of symbols and intervals.
Long |
Short |
Parameter |
Description |
.CancelAllOrders |
|
|
Cancels all open orders. |
.CancelAllOrdersSymbolAccount |
.CAOSA |
<symbol> <account> (Required) |
Cancels all open orders for a specific account and symbol |
.CancelLastOrder |
|
|
Cancels the last order sent. |
.CancelOrder |
|
|
Cancels all orders using the OrderName alias. |
.CancelReplaceSelected |
.CRS |
|
Enters the selected open order on the Orders tab into the Order Bar. |
.CancelReplaceSelectedMarket |
.CRSM |
|
Executes the Send Now - Replace this order as a Market Intelligent order for the selected open order on the Orders tab. |
.CancelReplaceSelectedPrice |
.CRSP |
<parameter> (Required) |
Replaces the selected open order on the Orders tab with the parameter. |
.CancelReplaceSelectedQuantity |
.CRSQ |
<quantity> (Required) |
Replaces the selected open order on the Orders tab with the new quantity. |
.CancelReplaceLast |
.CRL |
|
Enters the selected open order on the Orders tab into the Order Bar. |
.CancelReplaceLastMarket |
.CRLM |
|
Executes the Send Now - Replace this order as a Market Intelligent order for the last open order. |
.CancelReplaceLastPrice |
.CRLP |
<value> (Required) |
Replaces the last open order with the new price or min move. |
.CancelReplaceLastQuantity |
.CRLQ |
<quantity> (Required) |
Replaces the last open order with the new quantity. |
.CloseAllPositions |
|
|
Closes all open positions |
.ClosePosition |
.CPOS |
<symbol>, <account> (Required) |
Closes the Close Position window. |
.DecreasePrice |
|
|
Decreases the order price by the default increment. |
.DecreaseQuantity |
|
|
Decreases the order quantity by the default increment. |
.DecreaseStopPrice |
|
|
Decreases the stop order price by the default increment. |
.ExecuteBasket |
|
<list name>, <account>, <side>, <percent>, <route>, <duration> (Required) |
Executes a specified basket using the provided parameters. |
.IncreasePrice |
|
|
Increases the order price by the default increment. |
.IncreaseQuantity |
|
|
Increases the order quantity by the default increment. |
.IncreaseStopPrice |
|
|
Increases the stop order price by the default increment. |
.PlaceOrder |
|
<action>, <symbol>, <quantity>, <limit>, <duration>, <route> <account> <advanced> (Required) |
Allows orders to be placed from macros or EasyLanguage using the provided parameters. |
.ReversePosition |
|
<symbol>, <account>, <OSO Template> (Required/Optional) |
Reverses a position for a specific account and symbol with an optional Bracket OSO Template. |
Commands must be preceded with a period (.) with the exception of symbols and intervals.
Long |
Short |
Parameter |
Description |
File menu |
|
|
|
.Find <p> |
.FIND <p> |
<search word> (Optional) |
Opens the Find window for the specified word. If a word is not specified, the Find window opens blank. |
.PageDelete |
.PD |
|
Deletes the selected page. |
View menu |
|
|
|
.Preferences |
.PREF |
|
Opens the RadarScreen Preferences window. |
.ReferenceRows |
.RR |
|
Toggles the references rows on and off. |
.Refresh |
.RF |
|
Refreshes/reloads the currently selected cell. |
Insert menu |
|
|
|
.InsertIndicatorColumn <p> |
.IIC <p> |
<column> (Optional) |
Inserts the specified indicator column. If a column is not specified, the Insert Indicator Columns dialog will open. |
.InsertSymbol <p> |
.ISY <p> |
<symbol> (Optional) |
Inserts the specified symbol. If a symbol is not specified, the Insert Symbol dialog will open. |
.InsertSymbolList <p> |
.ISYL <p> |
<symbol> (Optional) |
Inserts the specified symbol list. If a symbol is not specified, the Insert Symbol List dialog will open. |
.LabelRow <p> |
.LR <p> |
<label row text> (Required) |
Inserts a label row containing the specified text. |
.PageInsert |
.PI |
|
Inserts a new RadarScreen page. |
Format menu |
|
|
|
.PageRename |
.PRN |
|
Rename the active RadarScreen page. |
.Session <p> |
.SESS <p> |
<session> (Required) |
Sets the session to be used. |
.UpdateIndication |
.UI |
|
Toggles the update indication on and off. |
Commands must be preceded with a period (.) with the exception of symbol names and interval/range commands.
Long |
Short |
Parameter |
Description |
.NewScanner |
.NSCN |
|
Creates a new Scanner LaunchPad window. |
.Preferences |
.PREF |
|
Displays the Preferences dialog. |
Commands must be preceded with a period (.) with the exception of symbol names and interval/range commands.
Long |
Short |
Parameter |
Description |
.Ask |
.ASK |
|
Toggles the display of Ask prices on and off. |
.Bid |
.BID |
|
Toggles the display of Bid prices on and off. |
.Minute <p> .Minutes <p> |
.MIN <p> .MINS <p> |
<minutes> (Required) |
Displays the number of specified minutes past. |
.Refresh |
.RF |
|
Refreshes/reloads the active window. |
.Tick <p> .Ticks <p> |
.TICK <p> .TICKS <p> |
<ticks> (Required) |
Displays the number of specified ticks past. |
.TickDay .TicksDay |
.TDAY |
|
Displays all of the ticks for the day. |
.Trade |
.TRD |
|
Toggles the display of Trade prices on and off. |
Commands must be preceded with a period (.) with the exception of symbol names and interval/range commands.
Long |
Short |
Parameter |
Description |
.CancelReplaceSelected |
.CRS |
|
Enters the selected open order on the Orders tab into the Order Bar. |
.CancelReplaceSelectedMarket |
.CRSM |
|
Executes the Send Now - Replace this order as a Market Intelligent order for the selected open order on the Orders tab. |
.CancelReplaceSelectedPrice <p> |
.CRSP |
<parameter> (Optional) |
Replaces the selected open order on the Orders tab with the parameter. |
.CancelReplaceSelectedQuantity <p> |
.CRSQ |
<quantity> (Required) |
Replaces the selected open order on the Orders tab with the new quantity. |
.CancelReplaceLast |
.CRL |
|
Replaces the selected open order on the Orders tab into the Order Bar. |
.NewTradeManagerAnalysis |
.NTMA |
|
Creates a new TradeManager Analysis window. |